Allegion Schlage Electronic Locks

The Synergis IP access control system connects to your Allegion Schlage electronic locks through Authentic Mercury EP controllers. All cardholder management, access rights, and scheduling are managed through the Synergis™ software. This provides unified management and monitoring of your Allegion electronic locks together with the rest of your access control infrastructure.

Schlage AD-Series Locks

AD-300 Lock Allegion

Allegion Schlage AD-300 Series Hardwired Locks

The Schlage AD-300 Series hardwired locks are managed by Authentic Mercury EP1501 and EP2500 controllers and the Synergis Cloud Link appliance. Communications to the Mercury EP controllers is established over RS-485, with all real-time access decisions handled by the Mercury intelligent devices. Popular card technologies are supported like HID Prox, HID iCLASS (CSN only), Mifare, and DESfire card technologies allowing for a phased migration when budget permits.

AD-400 Lock Allegion

Allegion Schlage AD-400 Series Wireless Locks

The Schlage AD-400 Series wireless locks are managed by Authentic Mercury controllers and the Synergis Cloud Link appliance. The AD-400 communicates wirelessly (900 MHz) to the Panel Interface Module (PIM-400), with the PIM-400 connected to the Mercury EP1501 or EP2500 over RS-485. Real-time communications with all access decisions are handled by the Mercury intelligent devices. For a phased migration when budget permits, all popular card technologies are supported including HID Prox, HID iCLASS (CSN only), Mifare, and DESfire.

Architecture Overview

 

Allegion and Genetec Access Control Diagram