SALTO Electronic Locks

The Synergis™ IP access control system supports popular wireless locks from SALTO with SALLIS wireless technology and SVN-enabled locks that make it easy for you to extend the reach of your access control system. SALTO wireless lock technology lowers installation costs associated with wiring and enables organizations to secure doors in hard to reach areas.

SALTO SALLIS

SALTO SALLIS Lock

SALTO Lock Connectivity with the SALLIS IP Router

The Synergis system offers you several possibilities to connect to SALLIS-enabled locks. Leveraging you corporate network, the Synergis Cloud Link appliance connects to the SALTO SALLIS IP router which in turn wirelessly manages up to 64 downstream locks. All access control decisions are managed by the Synergis Cloud Link appliance. Popular card technologies are supported like HID Prox, HID iCLASS (CSN only), Mifare, and DESfire, allowing for a phased migration when budget permits.

SALTO Lock Connectivity with the RS-485 Router

An alternative option is to connect the SALLIS RS-485 based router to Synergis Cloud Link over a serial connection. The SALLIS RS-485 router manages up to 16 downstream locks, with all decisions and event recording handled by the Synergis Cloud Link appliance. For a phased migration when budget permits, all popular card technologies are supported including HID Prox, HID iCLASS (CSN only), Mifare, and DESfire.

The HID VertX EVO V2000 is a dual-reader intelligent controller that can manage up to two doors. Handling all access control door decisions, the V2000 will report events and alarms in real-time over any IP network to the Genetec Synergis IP access control solution.

Supported Capabilities

  • Makes local decisions at the door
  • Includes 2 readers, 7 inputs, 4 outputs
  • Up to 65,000 cardholders and 99,999 offline events

More Information

SALLIS Architecture Overview

 

Synergis Cloud Link SALTO

SALTO SVN Data-on-Card

SALTO SALLIS SVN

 

Looking to eliminate the need to replace locks when security is breached due to the loss or theft of mechanical keys? Replace traditional mechanical locks with SALTO SVN-enabled locks. The SALTO SVN locks allow you to secure doors and openings that were too expensive to network with either wired or wireless locks. Using a smart data-on-card system, these stand-alone locks are updated with changes in access rights and schedules as cardholders flow throughout your premises. The keycard then transmits information such as blacklist data and battery status back to Synergis via online wall readers that update and receive information from the cards, anytime and anywhere in the building. The SALTO range of SVN supported locks includes the cost-effective XS4 escutcheons, cylinder locks, cabinet and locker locks as well as mortise locks.