Genetec Experience Center - Devices wall

Supported Device List

Here at Genetec, we support a wide range of industry-leading cameras, encoders, cloud and storage devices, intercoms, video surveillance equipment, and access control hardware.

Use the tabs below to find cameras and devices that are supported by Security Center

IMPORTANT NOTICE: The information in the generated list below is provided by Genetec for general reference, absolutely without warranty and at the user’s own risk. Users are strongly encouraged to validate their final edge device choice with the manufacturer and with a Genetec representative. In particular, the compatibility of certain devices may have been tested only by their manufacturer and not by Genetec. Genetec assumes no liability with respect to the user’s purchase or use of any device listed below.

* Note regarding decommissioned video units: Genetec no longer officially supports the following devices. Best-effort assistance will be provided for existing deployments only. We strongly recommend switching to supported alternatives to ensure optimal performance and security.

ManufacturerModel nameDevice typeFeaturesCompression typeAudioI/OProduct & version (Initial supported release)License typeLatest firmware supported (SC)
CanonVB-S32VECameraIPv6 Support, Edge Recording, PTZ SupportedH265, H264, MJPEGBi-directional1/1Security Center: 5.11.0.1 Driver Pack 11.1.0Regular1.0.0
Arecont VisionAV5145Camera-H264, MJPEGNo1/1Omnicast: 4.8 (SR5), Security Center: 5.2 (SR3)Regular65240
HoneywellHC60W45R4CameraEdge RecordingH265, H264, MJPEGBi-directional2/1Security Center: 5.9.3.0Regular1.0.10.20200422
Hanwha VisionSNO-6011RCameraEdge RecordingH264, MJPEGNo1/0Omnicast: 4.8 (SR5), Security Center: 5.2 (SR4)Regular4.00
Arecont VisionAV2245PMIR-SBA-LGCamera--No0/0Security Center: 5.4 (SR3)Regular65241
Arecont VisionAV12585DNCamera--No0/0Security Center: 5.6 (SR1)Regular65212
Axis Communications240QEncoder-MJPEGNo4/4Omnicast: 4.0 (SR1), Security Center: 5.0 (GA)Analog4.49
Arecont VisionAV08ZMD-400Camera-H264No1/1Security Center: 5.6 (SR1)Regular1.9
PelcoEABE1-2X40VF36-SPT0-AC-1CameraEdge Recording, PTZ SupportedH265, H264, MJPEGNo1/2Security Center: 5.12.0.0 (On_Prem) Driver Pack 12.3.0Regular4.80.0.16(835f547f)
Hanwha VisionXND-6080RVCameraEdge Recording, PTZ SupportedH265, H264, MJPEGBi-directional1/1Security Center: 5.6 (SR1)Regular1.40.03

Rows per page:

10