Supported Device List
Here at Genetec, we support a wide range of industry-leading cameras, encoders, cloud and storage devices, intercoms, video surveillance equipment, and access control hardware.
Use the tabs below to find cameras and devices that are supported by Security Center.
IMPORTANT NOTICE: The information in the generated list below is provided by Genetec for general reference, absolutely without warranty and at the user’s own risk. Users are strongly encouraged to validate their final edge device choice with the manufacturer and with a Genetec representative. In particular, the compatibility of certain devices may have been tested only by their manufacturer and not by Genetec. Genetec assumes no liability with respect to the user’s purchase or use of any device listed below.
* Note regarding decommissioned video units: Genetec no longer officially supports the following devices. Best-effort assistance will be provided for existing deployments only. We strongly recommend switching to supported alternatives to ensure optimal performance and security.
| Manufacturer | Model name | Device type | Features | Compression type | Audio | I/O | Product & version (Initial supported release) | License type | Latest firmware supported (SC) |
|---|---|---|---|---|---|---|---|---|---|
| Arecont Vision | AV2145 | Camera | - | H264, MJPEG | No | 1/1 | Omnicast: 4.8 (SR5), Security Center: 5.2 (SR3) | Regular | 65240 |
| Hanwha Vision | QNF-C9010 | Camera | Unit Dewarping, Software Dewarping, IPv6 Support, Edge Recording | H265, H264, MJPEG | No | 0/0 | Security Center: 5.11.0.1 Driver Pack 11.11.0 | Regular | 2.21.13 |
| Hanwha Vision | SNV-6013 | Camera | Edge Recording | H264, MJPEG | No | 0/0 | Omnicast: 4.8 (SR7), Security Center: 5.2 (SR7) | Regular | 4.00 |
| Axis Communications | Q6054 Mk III | Camera | - | - | No | 0/0 | Security Center: 5.6 (SR4_CU1) | Regular | 8.40.59 |
| Pelco | ESSE1-2X40-SBT-PAP | Camera | Edge Recording | H265, H264, MJPEG | No | 0/2 | Security Center: 5.11.0.0 (On_Prem) Driver Pack 11.4.0 | Regular | 4.52.0.16(b379babb) |
| Hanwha Vision | QND-6021 | Camera | Edge Recording | H265, H264, MJPEG | In | 1/1 | Security Center: 5.8.1.2 | Regular | 1.41.18 |
| Pelco | IME539-1IRS | Camera | IPv6 Support, Edge Recording | H265, H264, MJPEG | In | 1/1 | Security Center: 5.9.4.0 | Regular | 3.9.1.6.9600-A0.0 |
| Hanwha Vision | XNO-C8083R | Camera | IPv6 Support, Edge Recording | H265, H264, MJPEG | Bi-directional | 1/1 | Security Center: 5.10.0.0 Driver Pack 10.9.0 | Regular | 2.23.10 |
| Hanwha Vision | QNO-6070R | Camera | Edge Recording | H265, H264, MJPEG | In | 1/1 | Security Center: 5.5 (SR4) | Regular | 4.01 |
| Bosch | NDP-7803 | Camera | Edge Recording, PTZ Supported | H265, H264, MJPEG | Bi-directional | 1/1 | Security Center: 5.12.0.0 (On_Prem) Driver Pack 12.10.0 | Regular | 10.81.0025 |