Perimeter Intrusion Detection Integration

Senstar® offers perimeter intrusion detection technologies that protect critical infrastructure and other important assets. The Senstar-Genetec Gateway enables users to monitor Senstar systems from Genetec Security Center and configure alarm responses.

Key Features
Synchronize Senstar perimeter detection alarms and status information with Security Center, including:
 - Sensor/zone alarms
 - Enclosure tamper events
 - Sensor supervisor events
 - Summary of sensor internal diagnostic faults
 - Communications - lost events
Configure events-to-actions for alarm conditions
Alarm zones can be enabled/disabled within Security Center
For ranging sensors the alarm meter number is displayed in the Security Center Context field
Activate relays and other control points incorporated into Senstar sensors
Provide gateway between the Senstar Network Manager and Genetec Security Center
Connect to Senstar sensors, including:
 - FiberPatrol FP1150™ fiber optic fence and buried sensor
 - OmniTrax® buried cable sensor
 - FlexZone™ fence sensor
 - Senstar LM100™ Hybrid perimeter intrusion detection and intelligent lighting system
 - FiberPatrol FP400™ Zone-based fiber optic fence sensor
 - UltraWave™ microwave sensor
 - XField® electrostatic sensor
    - UltraLink I/O modules


Utilities and Communications Critical Infrastructure

Protect sites from intrusions and avoid liability

Critical infrastructure assets used for electricity generation, water treatment and telecommunications are constantly at risk of attack, vandalism, and theft. There are also concerns for regulatory compliance and for liability associated with trespassing. Senstar, with its broad portfolio of video management software, perimeter intrusion detection sensors, access control software, and intelligent video analytics, offers innovative, flexible solutions to protect critical infrastructure sites and improve resilience while meeting operational and regulatory requirements.The Senstar-Genetec Gateway software enables Genetec Security Center to display and manage the intrusion detection alarms raised by the Senstar perimeter intrusion detection sensors.

Oil and Gas

Protect Above and Below-Ground Infrastructure

The security of oil and gas infrastructure and assets are essential to a nation’s economic and environmental wellbeing. From initial extraction to end-point deliveries, the production chain relies on safe extraction, refining, and distribution across great distances. Pipelines and associated above-ground infrastructure along the chain are vulnerable to theft and sabotage.

Senstar, with its broad portfolio of video management software, perimeter intrusion detection sensors, access control software, and intelligent video analytics, offers innovative, flexible solutions to protect oil and gas assets and improve resilience while meeting operational and regulatory requirements.

The Senstar-Genetec Gateway software enables Genetec Security Center to display and manage the intrusion detection alarms raised by the Senstar perimeter intrusion detection sensors.

Logistics

Risk Mitigation Through Security and Business Intelligence

Factories, manufacturing facilities and distribution centers are critical to the operations of a company and require around-the-clock protection. To avoid disruptions and maximize productivity, organizations require solutions that reduce risk from both external and internal threats while providing insight into operations and business processes. By combining video surveillance with analytics, security sensors, and data from manufacturing or logistics systems, organizations can see what is going on, detect abnormalities, and implement corrective actions.
The Senstar-Genetec Gateway software enables Genetec Security Center to display and manage the intrusion detection alarms raised by the Senstar perimeter intrusion detection sensors.




Corrections

Prevent Escapes and Keep Staff Safe

Maintain public safety by detecting perimeter incidents immediately, at the initial stages of an escape attempt. Critical location data from perimeter sensors can be used to sound alarms, call-up specific cameras and PTZ locations, and then track subsequent movements. Perimeter sensors can be used in a variety of applications, including along fences, walls, buildings, and sally ports, while also taking into account the different physical and operational requirements of low, medium, and high-security facilities.

The Senstar-Genetec Gateway software enables Genetec Security Center to display and manage the intrusion detection alarms raised by the Senstar perimeter intrusion detection sensors.



Transportation

Keep People, Goods and Operations Safe and Moving

Transportation infrastructure and assets represent a vital economic engine for many cities and countries. Providing a safe environment while keeping business running smoothly can be a challenge. Senstar products provide security and improve operational effectiveness at a wide range of sites, including airports, bus and rail systems, ports and harbors, tunnels, and bridges.

The Senstar-Genetec Gateway software enables Genetec Security Center to display and manage the intrusion detection alarms raised by the Senstar perimeter intrusion detection sensors.


Features and benefits

Display zone alarms and status information generated by Senstar sensors within Security Center so that security operators have full situational awareness of threats at the perimeter.

Supported sensor data includes:
 - Sensor/zone alarms
 - Enclosure tamper events
 - Sensor supervision events
 - Diagnostic faults
 - Communication failures

Use sensor events to trigger events-to-actions responses within Security Center.

Relays and other control points within Senstar sensors can be activated from Security Center, either as events-to-actions responses or by operator input on an on-screen control.

Supports current Senstar perimeter intrusion detection sensors, including FlexZone, FiberPatrol 1150, Senstar LM100, FiberPatrol FP400, OmniTrax, UltraWave, UltraLink I/O and XField®.


Note: Content provided by partner.

Keywords


  • Virtual Tripwire
  • Virtual Perimeter

Geographic availability


  • North America
  • Latin America and the Carribean
  • Europe, Middle East, and Africa
  • Asia-Pacific

Industry verticals


  • City-Wide Surveillance
  • Critical Infrastructure
  • Law Enforcement
  • Transportation

Version and ordering information


Compatibility

5.7, 5.8, 5.9

Genetec part number

GSC-1SDK-SENSTAR-NMS

3 SDK connections needed.

One is used as the primary data channel, a second is used by a watchdog and a third is intermittently used for configuration.

Total 5 connections needed when a redundant/fallback configuration is installed

UNRIVALED EXPERIENCE
For more than 35 years, Senstar has been protecting thousands of sites around the world. Our installed perimeter intrusion detection products stretch over 45,000 km (28,000 mi). 

SERVICE EXCELLENCE
Senstar takes an accessible, responsive, and flexible approach to customer service and technical support for all our products.

BROAD RANGE OF PRODUCTS
The scope of our product portfolio is second to none. We offer a diverse range of in-house technologies and software. By selling what we manufacture, we can service, customize and adjust to meet requirements for any project.

GEOGRAPHIC REACH
With corporate offices in strategic locations worldwide and products operating in more than 100 countries, Senstar has an extensive global presence in the security market.

Connect with us


https://senstar.com/