Supported Device List
Here at Genetec, we support a wide range of industry-leading cameras, encoders, cloud and storage devices, intercoms, video surveillance equipment, and access control hardware.
Use the tabs below to find cameras and devices that are supported by Security Center.
IMPORTANT NOTICE: The information in the generated list below is provided by Genetec for general reference, absolutely without warranty and at the user’s own risk. Users are strongly encouraged to validate their final edge device choice with the manufacturer and with a Genetec representative. In particular, the compatibility of certain devices may have been tested only by their manufacturer and not by Genetec. Genetec assumes no liability with respect to the user’s purchase or use of any device listed below.
* List of devices that are no longer supported. Best effort assistance will be provided to existing end users that had them deployed prior to June 2020.
| Manufacturersorted ascending | Model | Device type | Minimum supported firmware | Edge recording support | Notes |
|---|---|---|---|---|---|
| Axis Communications | Q7401 | Video Encoder | 5.50.4 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6315-LE | PTZ Cam | 11.7.61 | Yes | Dual recording, Edge recording and Gap filling are not supported. Presets and Patterns are available, but cannot be renamed. Preset tours are not available. |
| Axis Communications | Q6215-LE | PTZ Cam | 9.30.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6135-LE | PTZ Cam | 10.7.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6125-LE | PTZ Cam | 9.20.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6075-E | PTZ Cam | 9.30.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P5414-E | PTZ Cam | 5.55.1.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3807-PVE | Multisensor | 10.8.1 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. Each lens requires a subscription. Additional virtual streams are not compatible. |
| Axis Communications | P3727-PLE | Multisensor | 10.6.0 | No | 4 Stratocast subscriptions required. Motion detection supported on 1st stream only. Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. Additional virtual streams are not compatible. |
| Axis Communications | P3719-PLE | Multisensor | 10.6.4 | No | 4 Stratocast subscriptions required. Motion detection supported on 1st stream only. Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. Additional virtual streams are not compatible. |
| Axis Communications | P3717-PLE | Multisensor | 8.40.1 | No | 4 Stratocast subscriptions required. Motion detection supported on 1st stream only Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. Additional virtual streams are not compatible. |
| Axis Communications | P3715-PLVE | Multisensor | 10.8.1 | No | 2 Stratocast subscriptions required. Motion detection supported on 1st stream only. Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. Additional virtual streams are not compatible. |
| Axis Communications | P3707-PE | Multisensor | 6.50.1.3 | No | 4 Stratocast subscriptions required. Additional virtual streams are not compatible. |
| Axis Communications | P3384-V | Fixed Dome | 5.60.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3375-VE | Fixed Dome | 7.25.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3375-V | Fixed Dome | 7.25.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3375-LVE | Fixed Dome | 7.25.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3375-LV | Fixed Dome | 7.25.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3367-V | Fixed Dome | 6.10.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3364-VE | Fixed Dome | 6.10.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3364-LVE | Fixed Dome | 5.60.1.4 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3364-LV | Fixed Dome | 5.60.1.4 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3363-VE | Fixed Dome | 5.60.1.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3363-V | Fixed Dome | 5.60.1.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3353 | Fixed Dome | 6.10.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3346-VE | Fixed Dome | 5.50.3.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3344-VE | Fixed Dome | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3344-V | Fixed Dome | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3343-VE | Fixed Dome | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3343-V | Fixed Dome | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3301-V | Fixed Dome | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3301 | Fixed Dome | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3268-LV | Fixed Dome | 10.8.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3267-LVE | Fixed Dome | 10.8.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3267-LV | Fixed Dome | 10.8.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3255-LVE | Fixed Dome | 10.10.69 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3247-LV | Fixed Dome | 10.8.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3245-VE | Fixed Dome | 9.50.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6055-E | PTZ Cam | 6.25.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6055 | PTZ Cam | 6.25.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6045-S MkII | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6045-C MkII | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6045 MkII | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6044-S | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6044-C | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6044 | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6042-E | PTZ Cam | 5.70.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6042 | PTZ Cam | 5.70.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6035 | PTZ Cam | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6034 | PTZ Cam | 5.51.6 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6010-E | Multisensor | 11.5.81 | Yes | 4 Stratocast subscriptions required. Motion detection supported on 1st stream only Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. Units autopilot for automatic PTZ tracking does not function when enrolled on Stratocast. Additional virtual streams are not compatible. By default the continuous recordings are not set. In an effort to get recording, the Config tool must be used to set continues recordings. |
| Axis Communications | Q1952-E | Bullet Cam | 11.6.94 | Yes | • Edge recording - Edge playback and gap filling (if supported) -> Supported and passed on 5.10 Stratocast SC via Federation 5.11 SC used. (note on on 5.2 Stratocast had issues detecting the SD Edge card) • HTTPS -> Not supported. Default is RTSP over HTTP. • Unit motion detection -> Supported • Audio In/Out (if supported). -> Audio In (only) Supported • Audio Alarm","Digital I/O (if supported) -> Not supported • Firmware upgrade (if supported) -> Only upgrade unit website was successful. Upgrade via the tool option in Config tool failed. |
| Axis Communications | Q1951-E | Bullet Cam | 11.6.94 | Yes | • Edge recording - Edge playback and gap filling (if supported) -> Supported and passed on 5.10 Stratocast SC via Federation 5.11 SC used. (note on on 5.2 Stratocast had issues detecting the SD Edge card) • HTTPS -> Not supported. Default is RTSP over HTTP. • Unit motion detection -> Supported • Audio In/Out (if supported). -> Audio In (only) Supported • Audio Alarm","Digital I/O (if supported) -> Not supported • Firmware upgrade (if supported) -> Only upgrade unit website was successful. Upgrade via the tool option in Config tool failed. |
| Axis Communications | Q1931-E | Fixed Cam | 6.50.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q1755-E | Fixed Cam | 5.50.4.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q1755 | Fixed Cam | 5.50.4.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q1602-E | Fixed Cam | 5.60.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q1602 | Fixed Cam | 5.60.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P7216 | Video Encoder | 5.51.7.4 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P7214 | Video Encoder | 5.51.6 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P7210 | Video Encoder | 5.51.6 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P5676-LE | PTZ Cam | 11.4.74 | Yes | - |
| Axis Communications | Q7436 | Video Encoder | 6.30.1 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P5655-E | PTZ Cam | 9.50.1 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q7406 | Video Encoder | 5.51.2.3 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P5515-E | PTZ Cam | 5.85.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6128-E | PTZ Cam | 6.40.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P5514 | PTZ Cam | 5.85.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6125-E | PTZ Cam | 9.20.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P5415-E | PTZ Cam | 5.55.1.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6115-E | PTZ Cam | 6.40.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6114-E | PTZ Cam | 6.40.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | Q6075 | PTZ Cam | 9.30.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3245-LVE | Fixed Dome | 9.50.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3227-LV | Fixed Dome | 8.40.1.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3224-V MkII | Fixed Dome | 6.35.2.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3224-LV MkII | Fixed Dome | 6.35.2.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M3044-V | Fixed Dome | 6.15.4 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P3215-VE | Fixed Dome | 6.10.1.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M3026-VE | Fixed Dome | 6.30.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1447-LE | Bullet Cam | 8.40.2.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M3025-VE | Fixed Dome | 5.50.5.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1445-LE | Bullet Cam | 8.40.2.2 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M3014 | Fixed Dome | 5.51.6 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1435-LE | Bullet Cam | 7.20.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M3004-V | Fixed Dome | 5.50.5.3 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1435-E | Bullet Cam | 6.30.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M2036-LE | Fixed Dome | 10.12.166 | - | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1427-LE | Bullet Cam | 5.80.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M2026-LE | Fixed Cam | 6.15.4.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1427-E | Bullet Cam | 5.80.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M1145-L | Fixed Cam | 5.90.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1425-LE MkII | Bullet Cam | 7.20.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M1143-L | Fixed Cam | 5.60.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1425-LE | Bullet Cam | 5.80.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M1135 | Fixed Cam | 9.40.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1405-LE | Fixed Cam | 5.80.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M1104 | Fixed Cam | 5.50.3 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | P1365 Mk II | Fixed Cam | 7.20.1 | Yes | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |
| Axis Communications | M1103 | Fixed Cam | 5.50.3 | No | Motion detection not supported in firmware versions 11.2.x and higher. Please use the LTS 2022 (version 10.x) firmware track to avoid issues relating to motion detection. No restrictions apply if motion detection is not needed. |